This evenings work was modeling a couple more of the OEM parts I intend to build the prototype with. All parts I am working with so far are the same pieces used in the development of Mk.1. Parts added this evening include the thrust vectoring servos and the battery. I had intended to use a bigger battery but putting this one in to the development layout has shown that available space may have other ideas in that regard, an increase of motor spacing may be required as I progress.

Components used are:
Servo: Turnigy™ TGY-9018MG MG Servo 2.5kg / 13g / 0.10
Battery: MultiStar Race Spec 3S 1400mAh 40-80C